Lock In the Clean, Block Out the Stains

Concrete/Surface Sealing Services

Keep your hardscapes looking freshly cleaned longer. Our concrete and paver sealing protects driveways, walkways, patios, and pool decks from moisture, oil, UV, and tire marks—enhancing colour and making maintenance a breeze.

why homeowners and managers choose us

We don’t one-size-fits-all your sealer. We evaluate surface type, age, porosity, and traffic, then select penetrating or film-forming products with the right sheen. Joints, edges, and transitions are detailed for even coverage and proper cure.

Surface-matched sealers: penetrating, natural-look, satin, or gloss

Oil, water, and UV resistance; anti-slip options available

Licensed, insured, WorkSafeBC compliant; tidy, respectful crews

Prep-first approach: cleaning + pH balancing for optimal adhesion

what we seal

If it’s a hardscape, we likely seal it.

Every surface behaves differently. We assess porosity and previous coatings, conduct a water drop test where needed, and plan the right prep and number of coats for long-lasting protection.

Concrete driveways & garage pads (broom-finish, smooth, stamped)

Pavers & slabs (sand-safe prep; joint stabilization options)

Exposed aggregate & natural stone (penetrating sealers)

Pool decks & patios (low-sheen, anti-slip additives available)

Retaining walls & vertical concrete (water-repellent treatments)

Lower Mainland coverage

aREAS WE ServE

We serve Vancouver, Burnaby, Richmond, North Vancouver, West Vancouver, Coquitlam, and Kelowna with professional concrete and surface sealing for homes, strata, and businesses.

  • Residential, commercial & strata services available

  • Fast photo estimates; on-site visits by request

Vancouver, BC, Canada

what’s right for your property?

Penetrating vs. film-forming sealers

Penetrating sealers preserve a natural look and repel moisture from within—great for exposed aggregate, natural stone, and high-traffic areas. Film-forming sealers (matte to gloss) deepen colour and add sheen—ideal for stamped concrete and pavers. We’ll recommend the best match for your goals and site conditions.

Penetrating = natural look, breathable, moisture barrier

Film-forming = colour enhancement, sheen options

Additives = UV stabilizers, anti-slip, joint stabilization

cOMPLEMENTING SERVICES

Bundle sealing with other exterior services

The best protection starts with the best prep. We clean first, then seal—bundle to save visits and lock in results.

Pressure Washing to remove grime and open pores

House/Soft Washing for siding, soffits & trims nearby

Window Cleaning after prep for spotless glass

Gutter Cleaning to prevent runoff staining

Roof Cleaning & Moss Removal to reduce organic fallout

Ready to Power Up Your Curb Appeal?

Some Questions & Answers

Frequently Asked Questions

Can't See the answer to your question? Head over to our FAQ page and take a look or reach out to us and one of our Sealing Specialists will get in touch with you shortly.

How long after cleaning can you seal?

Usually 24–48 hours, depending on weather and surface moisture. We verify dryness before sealing.

How long does sealer last?

Most penetrating sealers last 2–5 years; film-forming options vary by traffic and UV exposure. We’ll recommend a maintenance cycle.

Will sealing make it slippery?

Not with the right product. We can add anti-slip aggregates to film-forming sealers in wet or sloped areas.

Can you seal pavers without washing out the sand?

Yes. We use sand-safe cleaning methods and can re-sand and stabilize joints before sealing.

What sheen should I choose?

Natural/matte keeps it subtle; satin adds a soft glow; gloss creates a wet look. We’ll match sheen to surface and surroundings.

How soon can I use my driveway?

Foot traffic is usually fine after 24 hours; vehicle traffic typically after 48–72 hours, weather permitting.

© 2025 Powerhouse Exteriors All Rights Reserved.